[. . . ] For optimum performance and safety, please read these instructions carefully. Indb 1 RQT9699-E 4/23/2012 5:28:00 PM ENGLISH Operations in these instructions are described mainly using the remote control, but you can perform the operations on the main unit if the controls are the same. These operating instructions are applicable for the following system: Safety precautions WARNING!Unit • To reduce the risk of fire, electric shock or product damage, – Do not expose this unit to rain, moisture, dripping or splashing. [. . . ] € To play in a certain order, prefix the folder and file names with 3-digit numbers in the order you want them to play. Limitations on MP3 play • If you have recorded MP3s on the same disc as CD-DA, only the format recorded in the first session can be played. € Some MP3s may not be played due to the condition of the disc or recording. € Recordings will not necessarily be played in the order you recorded them. mPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. Stop playback Pause play Skip tracks Search through tracks Skip album Press [R/T] to select the album. 1-TRACK 1TR Cancel program mode Replay the program Check program contents Play one selected track on the disc. Press [2/3] or [5/6] when “PGM” is displayed in the stop mode. To check while programming, press [PROGRAM] twice after “PGM” appears, then press [2/3] or [5/6]. 1-ALBUM 1ALBUM RANDOM RND 1-ALBUM RANDOM 1ALBUM RND Clear the last Press [ DEL] in the stop mode. RQT9699 This function does not work with “Program play”. 6 6 • The program memory is cleared when you open the disc tray. USB ENGLISH 7 7 RQT9699 The USB connectivity enables you to connect and play MP3 tracks from USB mass storage device. Preparation Before connecting any USB mass storage device to the unit, ensure that the data stored therein has been backed up. The USB mass storage device connected via the cable will not be recognised by this unit. Press [ 2/3] or [5/6] to select the frequency of the required station. To tune automatically Press and hold [2/3] or [5/6] until the frequency starts changing rapidly. € Auto tuning may be interrupted when there is excessive interference. The station occupying a channel is erased if another station is preset to that channel. 1 Reduce the volume and connect the USB mass storage device to the USB port. Hold the main unit when connecting or disconnecting the USB mass storage device. Each time you press and hold the button: BP 2 Stop playback Selecting a preset station Press [TUNE MODE] to select “PRESET”. [. . . ] Memory reset (Initialisation) When the following situations occur, refer to the instructions below to reset the memory: • There is no response when buttons are pressed. ) 2) While pressing and holding down [1] on the main unit, reconnect the AC mains lead. Continue to press and hold the button (approximately 10 seconds) until “– – – – – – – –” is shown. Specifications ■ Amplifier section RMS output power stereo mode Front Ch (both ch driven) 5 W per channel (6 ), 1 kHz, 10% THD Total RMS stereo mode power 10 W ■ USB section USB Port USB standard Media file format support USB device file system USB port power USB 2. [. . . ]